Can You Paint Pressure Treated Wood? Tips and Instructions

Yes, pressure treated wood can be painted, but there are some important steps that should be followed to ensure a successful paint job.

Here are some tips and instructions for painting pressure treated wood:

  1. Allow the wood to dry: Pressure treated wood is typically wet when it is first purchased. Before painting, it’s important to allow the wood to dry out for several weeks. This will help ensure that the paint adheres properly and doesn’t peel or flake.
  2. Clean the wood: Before painting, the wood should be thoroughly cleaned to remove any dirt or debris. Use a solution of water and a mild detergent to scrub the wood, then rinse it off with a hose or pressure washer. Allow the wood to dry completely before painting.
  3. Sand the wood: Use a fine-grit sandpaper to lightly sand the wood. This will help to smooth out any rough spots and create a surface that the paint can adhere to.
  4. Apply a primer: To ensure that the paint adheres properly to the wood, it’s a good idea to apply a primer first. Choose a primer that is specifically designed for use on pressure treated wood.
  5. Apply the paint: Once the primer has dried, it’s time to apply the paint. Choose a high-quality exterior paint that is designed for use on wood. Apply the paint with a brush or roller, following the manufacturer’s instructions for drying times and application techniques.
  6. Apply a second coat: Depending on the type of paint you are using, you may need to apply a second coat. Follow the manufacturer’s instructions for drying times before applying the second coat.
  7. Maintain the paint: To ensure that the paint job lasts as long as possible, it’s important to maintain the paint. Check the wood periodically for signs of damage or wear, and touch up any areas that need it.

By following these tips and instructions, you can successfully paint pressure treated wood and create a beautiful and long-lasting finish.

Leave a Comment