How to eliminate chipping, flaking paint before repainting?

Fixing chipped and peeling paint before repainting can be a bit of a hassle, but it is essential to get the best possible finish. Here are some steps you can take to fix chipped and peeling paint:

  1. Scrape off any loose or peeling paint: Use a scraper or putty knife to remove any loose or peeling paint. Be careful not to scrape too hard and damage the underlying surface.
  2. Sand the surface: Use sandpaper to smooth the edges of the chipped or peeling area and to create a rough surface for the new paint to adhere to. A fine-grit sandpaper (120-grit or higher) should work well.
  3. Clean the surface: Use a damp cloth to clean the surface and remove any dust or debris.
  4. Apply primer: Apply a coat of primer to the affected area. This will help the new paint adhere better and prevent any stains from bleeding through.
  5. Apply paint: Once the primer has dried, apply a coat of paint to the area. Be sure to use the same type of paint as the original paint or a compatible substitute.
  6. Let dry and repeat if necessary: Let the paint dry completely, and if needed, apply another coat of paint.

By following these steps, you can effectively fix chipped and peeling paint and achieve a smooth and seamless finish when repainting.

Leave a Comment